Writing your own trajectory analysis

We create our own analysis methods for calculating the radius of gyration of a selection of atoms.

This can be done three ways, from least to most flexible:

1. Running the analysis directly from a function

2. Turning a function into a class

3. Writing your own class

The building blocks and methods shown here are only suitable for analyses that involve iterating over the trajectory once.

If you implement your own analysis method, please consider contributing it to the MDAnalysis codebase!

Last executed: May 18, 2021 with MDAnalysis 1.1.1

Last updated: February 2020

Minimum version of MDAnalysis: 0.19.0

Packages required:

• MDAnalysis ([MADWB11], [GLB+16])

• MDAnalysisTests

import MDAnalysis as mda
from MDAnalysis.tests.datafiles import PSF, DCD, DCD2
from MDAnalysis.analysis.base import (AnalysisBase,
                                      AnalysisFromFunction,
                                      analysis_class)
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
%matplotlib inline

Radius of gyration

Let’s start off by defining a standalone analysis function.

The radius of gyration of a structure measures how compact it is. In GROMACS, it is calculated as follows:

\[R_g = \sqrt{\frac{\sum_i m_i \mathbf{r}_i^2}{\sum_i m_i}}\]

where \(m_i\) is the mass of atom \(i\) and \(\mathbf{r}_i\) is the position of atom \(i\), relative to the center-of-mass of the selection.

The radius of gyration around each axis can also be determined separately. For example, the radius of gyration around the x-axis:

\[R_{i, x} = \sqrt{\frac{\sum_i m_i [r_{i, y}^2 + r_{i, z}^2]}{\sum_i m_i}}\]

Below, we define a function that takes an AtomGroup and calculates the radii of gyration. We could write this function to only need the AtomGroup. However, we also add in a masses argument and a total_mass keyword to avoid recomputing the mass and total mass for each frame.

def radgyr(atomgroup, masses, total_mass=None):
    # coordinates change for each frame
    coordinates = atomgroup.positions
    center_of_mass = atomgroup.center_of_mass()

    # get squared distance from center
    ri_sq = (coordinates-center_of_mass)**2
    # sum the unweighted positions
    sq = np.sum(ri_sq, axis=1)
    sq_x = np.sum(ri_sq[:,[1,2]], axis=1) # sum over y and z
    sq_y = np.sum(ri_sq[:,[0,2]], axis=1) # sum over x and z
    sq_z = np.sum(ri_sq[:,[0,1]], axis=1) # sum over x and y

    # make into array
    sq_rs = np.array([sq, sq_x, sq_y, sq_z])

    # weight positions
    rog_sq = np.sum(masses*sq_rs, axis=1)/total_mass
    # square root and return
    return np.sqrt(rog_sq)

Loading files

The test files we will be working with here feature adenylate kinase (AdK), a phosophotransferase enzyme. ([BDPW09])

u = mda.Universe(PSF, DCD)
protein = u.select_atoms('protein')

u2 = mda.Universe(PSF, DCD2)

Creating an analysis from a function

MDAnalysis.analysis.base.AnalysisFromFunction can create an analysis from a function that works on AtomGroups. It requires the function itself, the trajectory to operate on, and then the arguments / keyword arguments necessary for the function.

rog = AnalysisFromFunction(radgyr, u.trajectory,
                           protein, protein.masses,
                           total_mass=np.sum(protein.masses))
rog.run();

/Users/lily/anaconda3/envs/mda-user-guide/lib/python3.7/site-packages/MDAnalysis/analysis/base.py:282: DeprecationWarning: The structure of the `results` array will change in MDAnalysis version 2.0.
  "MDAnalysis version 2.0.", category=DeprecationWarning

<MDAnalysis.analysis.base.AnalysisFromFunction at 0x7fb6be5a3210>

Running the analysis iterates over the trajectory. The output is saved in rog.results, which has the same number of rows, as frames in the trajectory.

rog.results.shape

(98, 4)

labels = ['all', 'x-axis', 'y-axis', 'z-axis']
for col, label in zip(rog.results.T, labels):
    plt.plot(col, label=label)
plt.legend()
plt.ylabel('Radius of gyration (Å)')
plt.xlabel('Frame');

Text(0.5, 0, 'Frame')

You can also re-run the analysis with different frame selections.

Below, we start from the 10th frame and take every 8th frame until the 80th. Note that the slice includes the start frame, but does not include the stop frame index (much like the actual range() function).

rog_10 = AnalysisFromFunction(radgyr, u.trajectory,
                              protein, protein.masses,
                              total_mass=np.sum(protein.masses))

rog_10.run(start=10, stop=80, step=7)
rog_10.results.shape

/Users/lily/anaconda3/envs/mda-user-guide/lib/python3.7/site-packages/MDAnalysis/analysis/base.py:282: DeprecationWarning: The structure of the `results` array will change in MDAnalysis version 2.0.
  "MDAnalysis version 2.0.", category=DeprecationWarning

(10, 4)

for col, label in zip(rog_10.results.T, labels):
    plt.plot(col, label=label)
plt.legend()
plt.ylabel('Radius of gyration (Å)')
plt.xlabel('Frame');

Text(0.5, 0, 'Frame')

Transforming a function into a class

While the AnalysisFromFunction is convenient for quick analyses, you may want to turn your function into a class that can be applied to many different trajectories, much like other MDAnalysis analyses.

You can apply analysis_class to any function that you can run with AnalysisFromFunction to get a class.

RadiusOfGyration = analysis_class(radgyr)

To run the analysis, pass exactly the same arguments as you would for AnalysisFromFunction.

rog_u1 = RadiusOfGyration(u.trajectory, protein,
                          protein.masses,
                          total_mass=np.sum(protein.masses))
rog_u1.run();

/Users/lily/anaconda3/envs/mda-user-guide/lib/python3.7/site-packages/MDAnalysis/analysis/base.py:282: DeprecationWarning: The structure of the `results` array will change in MDAnalysis version 2.0.
  "MDAnalysis version 2.0.", category=DeprecationWarning

<MDAnalysis.analysis.base.analysis_class.<locals>.WrapperClass at 0x7fb6bec3b610>

As with AnalysisFromFunction, the results are in results.

for col, label in zip(rog_u1.results.T, labels):
    plt.plot(col, label=label)
plt.legend()
plt.ylabel('Radius of gyration (Å)')
plt.xlabel('Frame');

Text(0.5, 0, 'Frame')

You can reuse the class for other trajectories and selections.

ca = u2.select_atoms('name CA')

rog_u2 = RadiusOfGyration(u2.trajectory, ca,
                          ca.masses,
                          total_mass=np.sum(ca.masses))
rog_u2.run();

/Users/lily/anaconda3/envs/mda-user-guide/lib/python3.7/site-packages/MDAnalysis/analysis/base.py:282: DeprecationWarning: The structure of the `results` array will change in MDAnalysis version 2.0.
  "MDAnalysis version 2.0.", category=DeprecationWarning

<MDAnalysis.analysis.base.analysis_class.<locals>.WrapperClass at 0x7fb6bee51f90>

for col, label in zip(rog_u2.results.T, labels):
    plt.plot(col, label=label)
plt.legend()
plt.ylabel('Radius of gyration (Å)')
plt.xlabel('Frame');

Text(0.5, 0, 'Frame')

Creating your own class

Although AnalysisFromFunction and analysis_class are convenient, they can be too limited for complex algorithms. You may need to write your own class.

MDAnalysis provides the MDAnalysis.analysis.base.AnalysisBase class as a template for creating multiframe analyses. This class automatically sets up your trajectory reader for iterating, and includes an optional progress meter.

The analysis is always run by calling run(). AnalysisFromFunction actually subclasses AnalysisBase, and analysis_class returns a subclass of AnalysisFromFunction, so the behaviour of run() remains identical.

1. Define __init__

You can define a new analysis by subclassing AnalysisBase. Initialise the analysis with the __init__ method, where you must pass the trajectory that you are working with to AnalysisBase.__init__(). You can also pass in the verbose keyword. If verbose=True, the class will set up a progress meter for you.

2. Define your analysis in _single_frame() and other methods

Implement your functionality as a function over each frame of the trajectory by defining _single_frame(). This function gets called for each frame of your trajectory.

You can also define _prepare() and _conclude() to set your analysis up before looping over the trajectory, and to finalise the results that you have prepared. In order, run() calls:

• _prepare()

• _single_frame() (for each frame of the trajectory that you are iterating over)

• _conclude()

Class subclassed from AnalysisBase can make use of several properties when defining the methods above:

• self.start: frame index to start analysing from. Defined in run()

• self.stop: frame index to stop analysis. Defined in run()

• self.step: number of frames to skip in between. Defined in run()

• self.n_frames: number of frames to analyse over. This can be helpful in initialising result arrays.

• self._verbose: whether to be verbose.

• self._trajectory: the actual trajectory

• self._ts: the current timestep object

• self._frame_index: the index of the currently analysed frame. This is not the absolute index of the frame in the trajectory overall, but rather the relative index of the frame within the list of frames to be analysed. You can think of it as the number of times that self._single_frame() has already been called.

Below, we create the class RadiusOfGyration2 to run the analysis function that we have defined above, and add extra information such as the time of the corresponding frame.

class RadiusOfGyration2(AnalysisBase):  # subclass AnalysisBase

    def __init__(self, atomgroup, verbose=True):
        """
        Set up the initial analysis parameters.
        """
        # must first run AnalysisBase.__init__ and pass the trajectory
        trajectory = atomgroup.universe.trajectory
        super(RadiusOfGyration2, self).__init__(trajectory,
                                               verbose=verbose)
        # set atomgroup as a property for access in other methods
        self.atomgroup = atomgroup
        # we can calculate masses now because they do not depend
        # on the trajectory frame.
        self.masses = self.atomgroup.masses
        self.total_mass = np.sum(self.masses)

    def _prepare(self):
        """
        Create array of zeroes as a placeholder for results.
        This is run before we begin looping over the trajectory.
        """
        # This must go here, instead of __init__, because
        # it depends on the number of frames specified in run().
        self.results = np.zeros((self.n_frames, 6))
        # We put in 6 columns: 1 for the frame index,
        # 1 for the time, 4 for the radii of gyration

    def _single_frame(self):
        """
        This function is called for every frame that we choose
        in run().
        """
        # call our earlier function
        rogs = radgyr(self.atomgroup, self.masses,
                      total_mass=self.total_mass)
        # save it into self.results
        self.results[self._frame_index, 2:] = rogs
        # the current timestep of the trajectory is self._ts
        self.results[self._frame_index, 0] = self._ts.frame
        # the actual trajectory is at self._trajectory
        self.results[self._frame_index, 1] = self._trajectory.time

    def _conclude(self):
        """
        Finish up by calculating an average and transforming our
        results into a DataFrame.
        """
        # by now self.result is fully populated
        self.average = np.mean(self.results[:, 2:], axis=0)
        columns = ['Frame', 'Time (ps)', 'Radius of Gyration',
                   'Radius of Gyration (x-axis)',
                   'Radius of Gyration (y-axis)',
                   'Radius of Gyration (z-axis)',]
        self.df = pd.DataFrame(self.results, columns=columns)

Because RadiusOfGyration2 calculates the masses of the selected AtomGroup itself, we do not need to pass it in ourselves.

rog_base = RadiusOfGyration2(protein, verbose=True).run()

As calculated in _conclude(), the average radii of gyrations are at rog.average.

rog_base.average

array([18.26549552, 12.85342131, 15.37359575, 16.29185734])

The results are available at rog.results as an array or rog.df as a DataFrame.

rog_base.df

	Frame	Time (ps)	Radius of Gyration	Radius of Gyration (x-axis)	Radius of Gyration (y-axis)	Radius of Gyration (z-axis)
0	0.0	1.000000	16.669018	12.679625	13.749343	14.349043
1	1.0	2.000000	16.673217	12.640025	13.760545	14.382960
2	2.0	3.000000	16.731454	12.696454	13.801342	14.429350
3	3.0	4.000000	16.722283	12.677194	13.780732	14.444711
4	4.0	5.000000	16.743961	12.646981	13.814553	14.489046
...	...	...	...	...	...	...
93	93.0	93.999992	19.562034	13.421683	16.539112	17.653968
94	94.0	94.999992	19.560575	13.451335	16.508649	17.656678
95	95.0	95.999992	19.550571	13.445914	16.500640	17.646130
96	96.0	96.999991	19.568381	13.443243	16.507396	17.681294
97	97.0	97.999991	19.591575	13.442750	16.537926	17.704494

98 rows × 6 columns

Using this DataFrame we can easily plot our results.

ax = rog_base.df.plot(x='Time (ps)', y=rog_base.df.columns[2:])
ax.set_ylabel('Radius of gyration (A)');

Text(0, 0.5, 'Radius of gyration (A)')

We can also run the analysis over a subset of frames, the same as the output from AnalysisFromFunction and analysis_class.

rog_base_10 = RadiusOfGyration2(protein, verbose=True)
rog_base_10.run(start=10, stop=80, step=7);

<__main__.RadiusOfGyration2 at 0x7fb6bef4e690>

rog_base_10.results.shape

(10, 6)

rog_base_10.df

	Frame	Time (ps)	Radius of Gyration	Radius of Gyration (x-axis)	Radius of Gyration (y-axis)	Radius of Gyration (z-axis)
0	10.0	10.999999	16.852127	12.584163	14.001589	14.614469
1	17.0	17.999998	17.019587	12.544784	14.163276	14.878262
2	24.0	24.999998	17.257429	12.514341	14.487021	15.137873
3	31.0	31.999997	17.542565	12.522147	14.747461	15.530339
4	38.0	38.999997	17.871241	12.482385	15.088865	15.977444
5	45.0	45.999996	18.182243	12.533023	15.451285	16.290153
6	52.0	52.999995	18.496493	12.771949	15.667003	16.603098
7	59.0	59.999995	18.839346	13.037335	15.900327	16.942533
8	66.0	66.999994	19.064333	13.061491	16.114195	17.222884
9	73.0	73.999993	19.276639	13.161863	16.298539	17.444213

ax_10 = rog_base_10.df.plot(x='Time (ps)',
                            y=rog_base_10.df.columns[2:])
ax_10.set_ylabel('Radius of gyration (A)');

Text(0, 0.5, 'Radius of gyration (A)')

Contributing to MDAnalysis

If you think that you will want to reuse your new analysis, or that others might find it helpful, please consider contributing it to the MDAnalysis codebase. Making your code open-source can have many benefits; others may notice an unexpected bug or suggest ways to optimise your code. If you write your analysis for a specific publication, please let us know; we will ask those who use your code to cite your reference in published work.

References

[1] Oliver Beckstein, Elizabeth J. Denning, Juan R. Perilla, and Thomas B. Woolf. Zipping and Unzipping of Adenylate Kinase: Atomistic Insights into the Ensemble of Open↔Closed Transitions. Journal of Molecular Biology, 394(1):160–176, November 2009. 00107. URL: https://linkinghub.elsevier.com/retrieve/pii/S0022283609011164, doi:10.1016/j.jmb.2009.09.009.

[2] Richard J. Gowers, Max Linke, Jonathan Barnoud, Tyler J. E. Reddy, Manuel N. Melo, Sean L. Seyler, Jan Domański, David L. Dotson, Sébastien Buchoux, Ian M. Kenney, and Oliver Beckstein. MDAnalysis: A Python Package for the Rapid Analysis of Molecular Dynamics Simulations. Proceedings of the 15th Python in Science Conference, pages 98–105, 2016. 00152. URL: https://conference.scipy.org/proceedings/scipy2016/oliver_beckstein.html, doi:10.25080/Majora-629e541a-00e.

[3] Naveen Michaud-Agrawal, Elizabeth J. Denning, Thomas B. Woolf, and Oliver Beckstein. MDAnalysis: A toolkit for the analysis of molecular dynamics simulations. Journal of Computational Chemistry, 32(10):2319–2327, July 2011. 00778. URL: http://doi.wiley.com/10.1002/jcc.21787, doi:10.1002/jcc.21787.